Nuts and threaded Rods

We can help you in the selection of the right connecting elements for your special requirements. Please see the example applications below.

Threaded Rods

The standard length of our threaded rod is 1000 mm. Fitting nuts are offered, next to the above mentioned qualities of epoxide- and vinyl ester resin with reinforced fibreglas, additionally as phenol resin with cotton fibre reinforcement.

M   d   M (Nm)
8   6,8   2
10   8,5   5
12   10,2   8
14   12   12
16   14   18
18   15,5   22
20   17,5   28
24   21   60
27   24   60
30   26,5   60

Square and Hexagon Nuts

As standard we deliver square nuts in quadratic construction c = M (thickness of nut = thread diameter). We also deliver hexagon nuts as well as constructions of c = 2 x M.

Square Nuts

M   d   a   b   c1/c2
8   6,8   16   23   8/16
10   8,5   18   26   10/20
12   10,2   24   34   12/24
14   12   28   40   14/28
16   14   30   43   16/32
18   15,5   32   45   18/36
20   17,5   36   51   20/40
24   21   38   54   24/48
27   24   40   57   27/54
30   26,5   44   62   30/60

Hexagon Nuts

M   d   a   b   c1/c2
8   6,8   13   15   8/16
10   8,5   17   20   10/20
12   10,2   19   22   12/24
14   12   -   -   14/28
16   14   24   28   16/32
18   15,5   -   -   18/36
20   17,5   30   35   20/40
24   21   36   42   24/48
27   24   41   48   27/54
30   26,5   46   53   30/60

Application range of GRP connecting elements

  • Cooling tower construction
  • Off-Shore techniques (e.g. oil rig)
  • Chemical plant constructionPainting plants (e.g. car industry)
  • Electroplating plant
  • Hydraulic engineering (e.g. sewage treatment plant)
  • Engine construction
  • Cryogenic engineering (e.g. cooling plants)
  • Electrotechnology plants (e.g. high-frequency engineering)
  • Traffic engineering
  • Measuring equipment